2011 Beneteau Oceanis 34
$97,500
St Petersburg, FL, US
“Boat Pour”
Overview
St. Petersburg, Florida
Asking $97,500
Introduction and Key FeaturesBoat Pour is a well-equipped 2011 Beneteau Oceanis 34 now located in St. Petersburg, Florida, and offered at an attractive $97,500.
Designed by Jean-Marie Finot of Finot-Conq with an interior by Nauta Design, the Oceanis 34 combines responsive sailing performance, manageable sail handling, shallow-water cruising capability, and accommodations normally associated with a considerably larger yacht.
Her two-cabin, one-head interior sleeps up to six and offers approximately 6'3" of headroom, reverse-cycle air conditioning, a complete galley, proper navigation station, generous storage, and excellent natural light through numerous ports and hatches.
Above deck, Boat Pour features a spacious cockpit, walk-through transom, integrated swim platform, shoal-draft keel, traditional fully battened mainsail with Tides Marine Strong Track, furling genoa, Harken self-tailing winches, and running rigging arranged for efficient short-handed sailing.
The yacht also benefits from a number of meaningful upgrades, including a 2026 electrical distribution panel, three Group 31 AGM batteries installed in October 2024, Garmin GPSMAP 1243 multifunction display, AIS, Raymarine autopilot and sailing instruments, CruiseAir 16,000 BTU reverse-cycle air conditioning, and an approximately 29 HP Yanmar diesel with relatively low hours.
Key Features- Two-cabin, one-head cruising layout
- Sleeps up to six
- Approximately 6'3" interior headroom
- Shoal-draft keel with approximately 4'6" draft
- Yanmar 3YM30 diesel with relatively low hours
- CruiseAir 16,000 BTU reverse-cycle air conditioning
- Upgraded electrical distribution panel installed in 2026
- Three Group 31 AGM batteries replaced in October 2024
- Hitachi 80-amp high-output alternator
- Mastervolt battery charger
- ProWatt 600-watt inverter
- Dual 30-amp shore-power service
- Garmin GPSMAP 1243 multifunction display
- Raymarine wheel-pilot autopilot
- Raymarine sailing instruments
- Standard Horizon Matrix VHF with helm RAM microphone
- AIS transceiver
- Fully battened Dacron mainsail
- Tides Marine Strong Track mainsail system
- 120% Dacron roller-furling genoa
- Profurl headsail furling system
- Harken self-tailing winches
- Rigid boom vang
- Whisker pole
- Bimini frame remains aboard; bimini canvas is no longer present
- Opening companionway doors in place of traditional drop boards
- Bruce 33-pound anchor with chain and rode
- Revere four-person liferaft; reinspection required
- August 2024 survey available
- Approximately 300-NM recent repositioning from Pensacola to St. Petersburg
- Professionally repaired storm-related dock rash
- CE Certified, Classification A-6
Specifications
Dimensions
Vessel Details
Performance
Weights
Tanks & Capacity
Builder & Registry
Engine
Yanmar 3YM30
Features & Details
Broker Comments
The Beneteau Oceanis 34 remains one of the more appealing modern cruising designs in this size range because it successfully balances sailing performance, interior comfort, shallow draft, and manageable ownership.
Boat Pour is particularly well suited to a cruising couple, small family, or sailor seeking a manageable platform for exploring Florida's Gulf Coast, the Keys, Intracoastal Waterway, or Bahamas. Her approximately 4'6" shoal draft expands anchoring and cruising options considerably, while her traditional sail plan provides a familiar and efficient sailing experience.
Her fully battened mainsail is supported by a Tides Marine Strong Track, reducing friction while raising and lowering the sail. A 120% furling genoa, Harken self-tailing winches, traveler, rigid vang, rope clutches, wheel steering, and cockpit-led controls make her manageable with limited crew.
Below, the Nauta-designed interior remains one of the Oceanis 34's greatest strengths. Two genuinely private cabins, convertible salon seating, a full galley, enclosed head, navigation station, air conditioning, and generous water capacity make weekends and longer stays aboard comfortable.
Several upgrades enhance the package, including the 2026 electrical panel, three Group 31 AGM batteries installed in October 2024, 80-amp high-output alternator, Garmin multifunction display, AIS, reverse-cycle air conditioning, and extensive LED lighting.
Boat Pour's recent history is also being presented transparently. While in Pensacola, she sustained storm-related dock rash during a hurricane event. Those areas were professionally repaired. The bimini canvas and dodger visible in some earlier photography and video were destroyed and are no longer included with the boat, although the bimini frame itself was not damaged and remains aboard.
Following the repairs, Boat Pour was moved approximately 300 nautical miles from Pensacola to St. Petersburg. That relocation places her in the heart of one of Florida's most active sailing markets while also providing a recent extended operating history for prospective buyers to consider.
At $97,500, the seller has positioned Boat Pour to encourage a timely sale and give buyers an opportunity to acquire a well-equipped Oceanis 34 with a desirable shoal-draft configuration, comfortable accommodations, updated systems, and an openly disclosed history.
Storm History & Current Condition Disclosure
Transparency is important in the purchase of any used vessel.
Boat Pour sustained dock-related exterior damage during a hurricane event while located in Pensacola, Florida. The resulting dock rash was subsequently professionally repaired.
The damage being disclosed was associated with contact at the dock. Prospective buyers should independently inspect all repaired areas and satisfy themselves as to the vessel's current structural and cosmetic condition.
Additionally:
The bimini canvas shown in some listing photographs and video was destroyed during the storm and is no longer aboard
The dodger shown in prior media was also destroyed and is no longer aboard
The bimini frame was not damaged and remains with the vessel
Some photographs and video therefore depict the boat before the storm and should not be interpreted as showing the current canvas configuration
Boat Pour subsequently completed an approximately 300-NM relocation from Pensacola to St. Petersburg
Buyers are encouraged to obtain a new independent survey, haul-out, rig inspection, mechanical inspection, and sea trial
The purpose of this disclosure is to allow prospective buyers to evaluate Boat Pour with an accurate understanding of both her equipment and her history.
Accomodations
Boat Pour features Beneteau's desirable two-cabin, one-head arrangement with accommodations for up to six.
The Nauta Design interior makes excellent use of the yacht's 12-foot beam. Fixed windows, opening ports, overhead hatches, light-colored headliners, and warm cabinetry create an interior that feels noticeably larger than many boats in the mid-30-foot range.
Interior headroom is approximately 6'3".
Main SalonThe main salon features a U-shaped settee to port and longitudinal settee to starboard. The port dinette surrounds a centerline table attached at the compression post, with folding leaves allowing the table to remain compact underway and expand for meals or entertaining.
Salon features include:
Port and starboard settees
Convertible salon sleeping accommodations
Dinette table with folding leaves
Flat-screen television
Fixed and opening ports
Opening overhead hatch
LED lighting
Storage behind and beneath seating
Storage lockers above the settees
Synthetic cabin sole
CruiseAir reverse-cycle air conditioning
CO detectors
Approximately 6'3" headroom
The private forward owner's cabin includes:
V-berth
Marine mattress
Port and starboard storage
Hanging lockers
Opening overhead hatch
Natural light and ventilation
Privacy door
Water tank beneath berth
The private aft guest cabin is entered to port aft of the galley and includes:
Large full-width double berth
Athwartships sleeping arrangement
Hanging locker
Additional storage
Opening port
Standing and seated space near the entrance
Access to mechanical and electrical components beneath the berth
The enclosed head is located aft to starboard and includes:
Electric marine toilet
Molded sink and vanity
Separate shower area
Handheld shower fixture
Hot and cold pressure water
Storage
Approximately 21-gallon holding tank
Y-valve
Macerator/discharge pump
Privacy door
Boat Pour's galley is designed for actual cruising use rather than simply dockside entertaining.
Equipment includes:
- Propane stove
- Propane oven
- Front-loading 12V refrigerator
- Contour microwave
- Double stainless-steel sink
- Hot and cold pressure water
- Engine and shore-power heated water
- Nauta-designed cabinetry
- Generous countertop workspace
- Storage lockers and cabinets
Mechanical
Auxiliary propulsion is provided by a Yanmar 3YM30 naturally aspirated three-cylinder marine diesel.
EngineYanmar 3YM30
29 HP
Inboard diesel
Freshwater cooled
Approximately 390 indicated hours
Centerline installation beneath companionway
Raw-water sea strainer
Water-separating fuel filter
Engine-mounted secondary filter
Wet exhaust
Single-lever control
Tachometer and engine alarms
Adjustable engine mounts
Fiberglass engine beds and structural stringers
During the August 2024 sea trial, the engine was reported to operate smoothly without obvious vibration, with good cooling-water discharge and responsive handling. The vessel reportedly reached approximately 7 knots at about 3,200 RPM during the recorded wide-open-throttle portion of that sea trial.
Transmission and PropulsionYanmar/Kanzaki KM2P-1 transmission
Direct-drive shaft configuration
Stainless-steel propeller shaft
Three-blade fixed bronze propeller
Volvo water-injected dripless shaft seal
Cutlass bearing and external bearing carrier
Wheel steering
Emergency tiller
CruiseAir 16,000 BTU reverse-cycle air conditioning
Digital air-conditioning controls
115V and engine heat-exchanger water heater
Approximately 6.6-gallon Quick Nautic Boiler water heater
12V electric bilge pump
Manual cockpit-operated bilge pump
Shower sump
Freshwater pressure pump
Accumulator tank
Cockpit shower
Electric marine head
Fuel: Approximately 34 gallons
Freshwater: Approximately 83 gallons
Holding: Approximately 21 gallons
Electrical
A significant recent improvement aboard Boat Pour is the upgraded electrical distribution panel installed in 2026.
Equipment includes:
- Updated electrical panel installed in 2026
- 12V DC electrical system
- 110/115V AC electrical system
- Dual 30-amp shore-power inlets
- Shore-power cords
- Three Group 31 AGM batteries installed October 2024
- Dedicated starting and house-bank arrangement
- Hitachi 80-amp high-output alternator
- Mastervolt Powercharger 12/20-3 battery charger
- ProWatt 600-watt inverter
- Battery disconnect switches
- AC and DC circuit protection
- Digital electrical monitoring
- Fuel and water-level monitoring
- 12V outlets
- LED interior lighting
- LED navigation lights
- Engine-driven battery charging
- Dockside battery charging
- Shore-powered water heating
- Shore-powered reverse-cycle air conditioning
Electronics
Navigation and communication equipment is distributed between the helm and interior navigation station.
NavigationGarmin GPSMAP 1243 multifunction display
Touchscreen chartplotter
Sounder capability
Airmar multifunction transducer
Raymarine ST60 Tridata
Speed
Depth
Log
Raymarine ST60 wind instrument
Raymarine multifunction display
Raymarine wheel-pilot autopilot
Raymarine course computer
AIS transceiver
Em-Trak B100 Class B AIS identified in the 2024 survey
Binnacle compass
- Standard Horizon Matrix VHF
- Standard Horizon RAM microphone at helm
- Flat-screen television
- Stereo
- Cabin and cockpit audio
- LED cabin lighting
- LED navigation lights
Sails and Rigging
Boat Pour is fractional-sloop rigged with a conventional fully battened mainsail and furling headsail.
The traditional mainsail configuration combined with the Tides Marine Strong Track provides a direct, performance-oriented sail plan while reducing friction during hoisting and lowering.
Mast and Standing RiggingFractional sloop rig
Anodized-aluminum mast
Deck/cabin-stepped mast
Double-spreader configuration
Stainless-steel compression post
Mast height approximately 50'8"
1x19 stainless-steel standing rigging
Upper and lower shrouds
Double backstays
Forestay incorporated into furling system
Windex
Whisker pole
Rigid boom vang
Aluminum boom
Fully battened Dacron mainsail
Tides Marine Strong Track
Mainsail cover
Traveler
Mainsheet system
Reefing lines
Halyard arranged for cockpit management
120% Dacron genoa
Roller furling
Profurl furling system
Profurl C350 identified in prior survey
Genoa UV cover
Adjustable tracks and cars
- Two Harken 40.2 self-tailing primary winches
- Harken 35.2 self-tailing cabin-top winches
- Rope clutches
- Cabin-top traveler
- Rigid vang
- Whisker pole
- Running rigging led toward cockpit
- Wheel steering
Hull and Deck
Boat Pour has a white gelcoat hull and molded fiberglass deck with non-skid surfaces.
Her approximately 4'6" shoal draft is particularly attractive for Florida and Gulf Coast cruising and provides access to many anchorages and destinations that would be more restrictive for deeper-draft sailboats.
CockpitFeatures include:
Large self-draining cockpit
Port and starboard seating
Aft helm seat
Centerline wheel steering
Folding cockpit table
Bimini frame — canvas no longer present
Leather-wrapped wheel
Wheel cover
Winch covers
Pedestal-mounted navigation electronics
Engine controls
Compass
VHF RAM microphone
Cockpit shower
Cockpit lockers
Teak cockpit inlays and trim
Walk-through transom
Folding/lifting helm seat
Integrated swim platform
Boarding ladder
Canvas disclosure: Older photography and video may show a bimini and dodger. Both canvas components were destroyed during the hurricane event and are no longer included. The bimini frame itself was not damaged and remains with the vessel.
CompanionwayThe companionway has been upgraded with hinged opening doors rather than conventional removable drop boards.
Features include:
Sliding companionway hatch
Hinged opening doors
Molded steps
Stainless-steel grab rails
Engine access beneath steps
Port and starboard side decks
Cabin-top handrails
Stainless-steel bow pulpit
Stainless-steel stern rails
Double lifelines
Boarding gates
Deck-level fuel, water, and waste fills
Opening ports and hatches
Anchor locker
Foredeck working area
Adjustable genoa tracks
Cabin-top traveler
Mooring cleats
Approximately 33-pound Bruce galvanized-steel claw anchor
Chain and nylon rode
Stainless-steel bow roller
Self-draining anchor locker
Currently aboard/included:
Bimini frame
Wheel cover
Mainsail cover
Winch covers
Genoa UV cover
Not included/currently absent:
Bimini canvas — destroyed during hurricane
Dodger — destroyed during hurricane
Construction
Boat Pour was built by Beneteau America in Marion, South Carolina.
The Oceanis 34 was designed by Finot-Conq, with Jean-Marie Finot credited as naval designer and Nauta Design responsible for the interior.
Construction includes:
- Solid molded fiberglass hull
- Structural fiberglass liner/grid
- Fiberglass deck and superstructure
- Balsa-cored deck
- Molded non-skid surfaces
- Marine-plywood bulkheads and partial bulkheads
- Bonded structural liner system
- External cast-iron shoal-draft keel
- Stainless-steel keel bolts
- Spade rudder
- Stainless-steel rudder stock
- Bronze below-waterline through-hulls
- Double-clamped underwater hose connections
Survey Information
A pre-purchase condition and valuation survey was completed in August 2024 and is available upon request.
The survey provides useful historical information regarding the condition of Boat Pour at the time of that inspection. Among other observations, accessible hull, deck, rudder, keel, steering, mechanical, and electrical components were evaluated.
Because any prior survey represents the vessel only as she existed on the date of that inspection, it should not be relied upon as an assessment of the vessel's present condition or as a substitute for a buyer's own inspection—particularly in light of the subsequently disclosed storm history.
Prospective buyers are strongly encouraged to commission their own current:
- Condition and valuation survey
- Haul-out
- Mechanical inspection
- Rig inspection
- Sea trial
- Inspection of professionally repaired storm-affected areas
Specifications
- Vessel: Boat Pour
- Year: 2011
- Manufacturer: Beneteau
- Model: Oceanis 34
- Location: St. Petersburg, Florida
- Asking Price:$97,500
- Designer: Jean-Marie Finot / Finot-Conq
- Interior Designer: Nauta Design
- LOA: 33'11"
- LWL: 30'8"
- Beam: 12'0"
- Draft: Approximately 4'6"
- Keel: Shoal draft
- Bridge Clearance: Approximately 50'8"
- Headroom: Approximately 6'3"
- Displacement: Approximately 12,390 lbs
- Ballast: Approximately 3,556 lbs
- Cabins: Two
- Heads: One
- Sleeping Capacity: Up to six
- Engine: Yanmar 3YM30
- Power: 29 HP
- Engine Hours: Approximately 390
- Drive: Direct shaft
- Fuel: Approximately 34 gallons
- Fresh Water: Approximately 83 gallons
- Holding: Approximately 21 gallons
- Hull: Fiberglass monohull
- CE Certification: A-6
Available Upon Request
- August 2024 pre-purchase survey
- Market appraisal
- Owner's manual
- Parts information
- Model brochure and specifications
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy or completeness of this information, nor warrant the condition of the vessel or any equipment included with the vessel.
The vessel has a disclosed history of storm-related dock damage while located in Pensacola, Florida. The affected areas are reported to have been professionally repaired. Prospective buyers should independently inspect and evaluate those repairs and the vessel's present condition.
Some photographs and videos used in marketing were created prior to the storm event and may depict equipment that is no longer aboard, specifically the bimini canvas and dodger. The bimini frame remains.
Specifications, dimensions, capacities, equipment descriptions, operating hours, dates, maintenance information, repair information, survey findings, and other details may have been supplied by the owner, prior brokers, surveyors, manufacturers, repair facilities, or other sources and should be independently verified.
Any prior survey describes the vessel only as found on the date and under the circumstances of that inspection and should not be interpreted as a representation of the vessel's present condition.
A prospective buyer should instruct their agents, marine surveyors, mechanics, riggers, and other qualified professionals to investigate and validate all details considered important, including the vessel's storm history, repaired areas, hull and deck condition, machinery, rigging, and systems.
Engine hours are believed accurate but cannot be guaranteed.
This vessel is offered subject to prior sale, price change, or withdrawal from the market without notice.
Co-Brokerage
Preferred Yachts offers this listing on a 50-50 split with corresponding Florida licensed brokerages. Brokers unlicensed in Florida must contact listing broker to make arrangements that comply with Florida law.
Disclaimer
Virtual Tours
Videos
Walkthru Video
Beneteau 34 Under Sail in Pensacola Bay
All Photos
Inquire About This Yacht
Interested in the 2011 Beneteau Oceanis 34? Our expert brokers are ready to assist you.
